Varlocity 30cc Classic Ugly Stik 85" (2150mm) Laser-Cut Short Kit

Overview

The Varlocity 30cc Classic Ugly Stik is designed for RC enthusiasts who desire a perfect mix of traditional style and contemporary performance. With an 85-inch wingspan and robust construction, this model is designed for 30cc gasoline engines, delivering an outstanding sport flying experience suitable for pilots from beginner to expert. The model features a classic Stik design with modern updates, including the choice of Classic Stik or Ultra Stick style tail surfaces, and is ready for water-based activities with float compatibility.

This Varlocity Laser & Models laser-cut short kit provides the precision-cut components required to begin construction, allowing builders the satisfaction of completing the structure using traditional techniques. The kit includes a building jig and printed plan, ensuring accurate assembly. It is ideal for modellers seeking a rewarding sport project with legendary performance and versatile features.

Aircraft History

The Ugly Stik is one of the most iconic and enduring sport model designs in aeromodelling history. It was originally designed by Phil Kraft in the 1960s and quickly became a favourite among modellers for its excellent flying characteristics, simple construction, and forgiving nature. The design has been reproduced in countless sizes and variations, from giant-scale to micro.

The Ugly Stik's name came from its unpretentious appearance, which belied its superb flight performance. It was designed to be a "sport" model that could be built quickly, flown aggressively, and repaired easily. The design's success led to numerous variations, including the "Das Ugly Stik" and many other derivatives. This modern version from Varlocity keeps the classic spirit alive with contemporary updates and features.

About the Model

The Varlocity 30cc Classic Ugly Stik features a traditional built-up construction using balsa and plywood, with interlocking components for precise assembly. The kit includes a building jig to ensure a simple flat-built wing. The model is designed for 30cc gasoline engines and offers the choice of Classic Stik or Ultra Stick style tail surfaces. It can be configured as a nose wheel or tail dragger and is ready to accept floats.

The construction uses conventional modelling tools and techniques. The model is designed with simple, fast assembly in mind, and internal strength is great enough to allow the use of most covering materials. It offers the legendary Ugly Stik flight characteristics with modern versatility.

Features

• Precision laser-cut balsa and plywood components
• Classic Ugly Stik design with modern updates
• Choice of Classic Stik or Ultra Stick style tail surfaces
• 85-inch wingspan for impressive scale presence
• Designed for 30cc gasoline engines
• Interlocking components for precise assembly
• Includes building jig and printed plan
• Can be built as nose wheel or tail dragger
• Ready to accept floats for water-based activities
• Suitable for beginner to expert pilots
• Manufactured by Varlocity Laser & Models

Why You'll Love Building It

• Traditional stick-built aeromodelling that's enjoyable from the first rib to final covering.
• A rewarding project for builders of all skill levels, from beginner to expert.
• Legendary Ugly Stik flying characteristics with modern versatility.
• Choice of tail configurations to suit your preference.
• A proven design with contemporary updates for the 21st-century modeller.

What's Included

• Precision laser-cut balsa and plywood components
• Building jig for accurate wing construction
• Printed plan
• All interlocking parts for precise assembly
• Choice of Classic Stik or Ultra Stick style tail components
• Additional laser-cut structural components shown on the original plan

Only the precision laser-cut wooden parts, building jig, and printed plan are supplied.

What's Required

Mandatory Items

• Strip wood
• Sheet balsa
• Plywood sheeting where required
• Building board
• Adhesives
• Covering materials
• Hinges
• Control linkages and pushrods
• Hardware
• Power system
• Radio system

Note: The kit includes waste wood that has been cut to create the sticks needed by the kit. Spars are not included and must be supplied by the builder.

Recommended Accessories

• Aluminum wing tube (available separately)
• Landing gear appropriate for nose wheel or tail dragger configuration
• Appropriate fuel tank
• Spinner for chosen engine
• Floats for water-based activities (if desired)

Verified Specifications

Recommended Equipment

• 30cc gasoline engine (DLE 30 or equivalent)
• Appropriate propeller for chosen engine
• 4-channel radio system
• High-torque servos suitable for the model's size
• Appropriate fuel tank
• Spinner
• Aluminum wing tube (available separately)

These recommendations are based on the original design documentation and common building practice. Builders may select equivalent modern equipment to suit their preferences.

Builder Notes

• Suitable for builders of all skill levels, from beginner to expert.
• This kit features interlocking components for precise assembly.
• The included building jig ensures a simple flat-built wing.
• Choose between Classic Stik or Ultra Stick style tail surfaces.
• Can be built as a nose wheel or tail dragger – choose your preference.
• Ready to accept floats for water-based activities.
• Be aware that spars are not included – these must be supplied by the builder.
• Dry-fit major assemblies before gluing.
• Maintain accurate alignment throughout construction.
• Balance the completed aircraft carefully at the recommended centre of gravity.

Frequently Asked Questions

• Is a plan included?
  Yes, a printed plan is included with this kit.
• Is hardware included?
  No. This is a laser-cut short kit only. Hardware, covering, and adhesives are not included.
• Is this suitable for beginners?
  Yes, this model is designed to be suitable for pilots from beginner to expert.
• What tail options are included?
  The kit includes components for both Classic Stik and Ultra Stick style tail surfaces.
• Can it be built as a tail dragger?
  Yes, the model can be built as either a nose wheel or tail dragger.
• Can it be flown from water?
  Yes, the model is ready to accept floats for water-based activities.
• Does the kit include the wing tube?
  No, the aluminum wing tube is an optional addition available separately.
• What wood is included?
  All precision laser-cut balsa and plywood parts are included. The kit also includes waste wood cut to create sticks needed for construction.

Safety & Disclaimer

This product is a precision laser-cut short kit. Strip wood, hardware, covering materials, adhesives, electronics, power system and building supplies are not included unless specifically stated. Builder experience is recommended. Power system recommendations are suggestions only and should be selected to suit the completed aircraft and intended flying style. All specifications are based on the original design documentation and are subject to builder interpretation. The manufacturer accepts no responsibility for the final assembly, airworthiness, or operation of the completed model. The builder assumes all responsibility for the safe construction and operation of the model aircraft.